the spirit of perfection

Tee Flanged or Butt Weld Strainers

Tee Flanged or Butt Weld Strainers Tee Flanged or Butt Weld Strainers
    Salient Features
  • Low cost
  • Flexible construction
    Design Features
  • Single piece cast construction with integral flanges (without flanges for butt weld)
  • Gross filtration area of 3 to 5 times inlet cross section area
  • Drain/blow off connection furnished with plug as standard
  • Strainers meet ASME B16.5 or ASME B16.25 & ASME B16.34 requirements
    Available Materials of Construction
  • Carbon steel
  • Stainless steel
    End Connection
  • Flat face Flanged
  • Raised face Flanged
  • Butt Weld
  • RTJ Flanged
    Size Range*
  • 2” to 8”
  • #150 to #300
  •  

    Applications

  • Power Industry
  • Chemical Industry
  • Oil and Gas Industry
Standard Parts List
Legend  
TFWA1 – Tee Flanged or Butt Weld #150 Carbon Steel Variants
TFWB1 – Tee Flanged or Butt Weld #300 Carbon Steel Variants
TFWA2 – Tee Flanged or Butt Weld #150 Stainless Steel Variants TFWB2 – Tee Flanged or Butt Weld #300 Stainless Steel Variants
Parts List TFWA1 & TFWB1 TFWA2 & TFWB2
Body & Cover ASTM A216 Gr. WCB ASTM A216 Gr. WCC ASTM A352 Gr. LCB ASTM A352 Gr. LCC ASTM A351 Gr. CF8 ASTM A351 Gr. CF8M ASTM A351 Gr. CF3 ASTM A351 Gr. CF3M
Screen Frame & Mesh ^ AISI 304 AISI 316 AISI 304 AISI 316 AISI 304L AISI 316L
Drain Plug ASTM A105 AISI 316 AISI 304 AISI 316 AISI 304L AISI 316L
Fasteners ASTM A193 Gr. B7M/ A194 Gr. 2HM ASTM A320 Gr. L7M/ A194 Gr. 7M ASTM A193 Gr. B8MA/A194 Gr. 8MA
Gasket Asbestos Free Gasket Teflon Gasket

    Notes
    Other sizes and classes can be developed.
    Other materials of construction can also be supplied.
    Our parts list is indicative of our standard offerings. It is subject to change.
    Please consult factory for further information.

    Optional Accessories and Spares

  1. 1. Differential pressure indicator/inlet and outlet pressure gauges to indicate clogged screen (time for cleaning)
  2. 2. Special cover arrangements to ease maintenance operation
  3. 3. Spare screens, gaskets, and fasteners to reduce process downtime
  4. ^ Mesh Size is based on customer’s requirement. Standard is 10 Mesh.